Jeep Tj Hood Prop Clip Guide: Reliable Fits For Secure Hood Support 2026

⚡ Quick Verdict

📋 How We Evaluated

Evaluation focused on fit accuracy, material durability, and installation practicality based on stated compatibility and hardware style. Performance expectations centered on secure hood-rod retention during repeated openings. Value also factored in replacement vs upgrade claims and how closely each listing aligns with original part numbers and Amazon-style buyer confidence signals.

Replacement Part Number	J4007456
Prop-Rod Hole Shape	Rectangular
Included Quantity	1 clip (2 pieces assembled)
Installation Speed Claim	Installs in seconds

What We Found

This aftermarket hood prop rod retainer keeper is built around the J4007456 part-number ecosystem and lists multiple Wrangler year ranges (including 1987-95 Wrangler and 2000-06 Wrangler), plus some Dodge/Chrysler cross-application references.

The listing calls out a rectangular prop-rod hole shape, which is a useful detail for getting the clip to sit correctly. It’s described as an OEM-quality replacement, but material specifics aren’t clear, so the real heat/aging durability comes down to the actual plastic used.

It’s also a two-piece clip that needs assembly before installation, even though the install is described as quick using the provided images. My fit confidence mostly depends on whether your mounting hole matches that rectangular layout and whether the prop rod head locks the way you expect.

Who It’s For

I’d shortlist this if you want a straightforward J4007456 replacement and you’re trying to get stable hood support back without overthinking it. It’s also a good match if you’re comfortable assembling the two-piece clip and following the installation steps shown in the listing images.

Since the compatibility references extend to other Chrysler/Dodge models, it can work well for multi-vehicle garages – just make sure the prop-rod hole shape lines up with your Jeep.

OEM Number	55075480AC
Compatibility	Jeep Wrangler 1997-2000
Material	Iron
Package Included	1PC hood support rod clip

What We Found

RLB-HILON narrows in on a specific need: it targets Jeep Wrangler years 1997-2000 and calls out OEM number 55075480AC. The listing says the clip is made of iron, which is the kind of material choice you’d typically want closer to the engine bay.

The downside is that the compatibility window is narrow, and there aren’t detailed dimensions listed – so if your TJ/Wrangler configuration is outside that 97-00 range, I’d treat fit as “verify first.” The content reads like a direct replacement keeper rather than a universal clip, which helps when you’re shopping with part-number accuracy in mind.

It also doesn’t provide the same level of end-to-end installation guidance here, so installation confidence depends more on the vehicle’s existing hardware and your comfort level.

Who It’s For

This is best for owners who want an OEM-number-specific swap for a 1997-2000 Wrangler application tied to 55075480AC. I’d also consider it if you prefer metal hardware near heat.

If your Jeep is a different year (or you’re unsure), I’d avoid assuming fit – without dimensions and hole-geometry details, you’ll want to confirm before ordering.

Product Type	Hood Prop Rod Retaining Clip
Part Listing	Dorman 45999
Replacement Style	Direct replacement matching OE specifications
Fit Verification Method	Garage tool by make, model, trim

What We Found

Dorman 45999 presents as an OE-spec direct replacement. What stands out is the way the listing stresses original equipment specifications and directs buyers to verify fit using a make/model/trim vehicle-fit tool. It also leans into durable materials and frames the part as a cost-effective alternative to dealer pricing.

Importantly, it doesn’t market a conversion to stainless or a special retention method – it’s positioned as secure hood-rod retention that matches the original design. Material details remain general, but the ordering workflow and OE-spec messaging are what reduce the guessing game for hood prop keeper replacements.

If the fit tool confirms your vehicle and the style matches, this reads like a low-risk repair choice.

Who It’s For

I’d recommend this for TJ and Wrangler owners who want a predictable, match-to-OE style repair rather than experimenting with upgrades. It’s especially useful when you’re trying to avoid the common incorrect-clip problem across close model years – using the fit tool helps.

If you’re doing maintenance yourself and want minimal surprises, Dorman’s compatibility-first approach is exactly what I look for.

Replace Part Number	J4007456
Material	Stainless steel
Fixing Method	Screw fixing with bolt tightening
Compatibility Span	Jeep Wrangler YJ TJ 1987-2006 and select Chrysler/Dodge

What We Found

EVRBUL’s listing is the most “upgrade-focused” in this group. It describes two changes: a screw-fixing retention method (aimed at holding the hood prop holder more firmly) and a material shift to stainless steel (targeting better resistance to aging and breakage versus plastic).

Compatibility is broad across Wrangler YJ/TJ from 1987-2006 and multiple Dodge/Chrysler references tied to the J4007456 support rod retainer number. That J4007456 connection matters for TJ owners replacing commonly failed keepers.

One catch: the upgraded install involves tightening hardware as part of the process, so the feel of “factory-like” fit may not be the same as the original press-in style.

The listing also doesn’t provide dimensions or estimated installation time, so you’ll want to rely on the fit confirmation and the installation method described.

Who It’s For

I’d shortlist this for TJ owners who open the hood often or who want more confidence that the clip won’t loosen over repeated use. The stainless + screw-fixing angle fits drivers dealing with heat-brittled plastic keepers.

It also works for broader vehicle families because of the multi-application compatibility, but I’d still confirm that the hole style on your exact setup matches what the clip is meant for.

Part Number	55075480AC
Compatibility	Jeep Wrangler TJ 1997-2000
Material	Iron
Included Quantity	1PC hood prop rod retainer clip

What We Found

This option is built around a very specific target: 1997-2000 Jeep Wrangler TJ applications and part number 55075480AC. The listing calls out sturdy iron construction and frames the installation as a direct, easy replacement to restore hood support. It’s packaged as a single clip, with no mention of multi-piece assembly.

Compatibility is narrow, which actually helps because you’re less likely to end up with the wrong keeper style for adjacent revisions. Still, the listing doesn’t include dimensions, and beyond the direct-replacement claim, there isn’t a detailed installation walkthrough here.

Who It’s For

I’d buy this when your TJ setup matches the 55075480AC need and you want a simple swap – especially if you prefer metal hardware near heat sources. The narrow year coverage is helpful if you’re trying to avoid incorrect-clip mismatches.

It’s also a good fit if you don’t want an assembled multi-piece product and you’re comfortable confirming your Jeep’s exact fit before ordering.

Replace Part Number	J4007456
Material Claim	High-quality plastic resistant to wear and high temperatures
Pack Size	2 pack
Installation Outline	Press-in clip, insert rod head, tighten bolt

What We Found

This J4007456-focused upgrade listing is a two-pack and outlines an installation sequence that includes aligning the fixing clip, pressing it into the hole, seating the support rod head into the slot, and then tightening a bolt.

The listing claims wear- and heat-resistant plastic designed to resist anti-aging and deformation, but it doesn’t provide deeper material specifics beyond that. Installation instructions aren’t included, which puts more weight on the provided listing details and any assembly/steps implied by the images.

Compatibility is tied to the J4007456 support rod retainer ecosystem, including Wrangler YJ/TJ and multiple Dodge/Chrysler applications. The two-pack can be handy if both sides need replacement, but without dimensions and with only general plastic claims, I’d still want to be confident the hole geometry matches your Jeep setup.

Who It’s For

This makes sense if you’re replacing both sides of a hood prop system or you want spares on hand for a matched J4007456 repair. It’s a good option for DIY installers who understand how the support rod sits and are comfortable with a bolt-tightening step.

It also fits multi-vehicle households that have other Dodge/Chrysler models listed under the same part-number setup.

Replacement Part Number	J4007456
Material	Plastic
Color	Black
Face Diameter	0.294 inches

What We Found

KarParts360 lists a J4007456 application and is unusually clear about dimensions, including face diameter, hole diameter, and shaft diameter values. It’s a black plastic clip and comes with a brand-new sealed-in-box claim.

In a category where many listings skip measurements, these numbers can make fit checking much easier – especially for TJ setups where hole geometry matters for correct seating and retention.

The tradeoff is that there’s no rating data shown here and no Prime availability information, so you’re relying more on the specs than on verified buyer outcomes.

Since it’s still plastic, long-term heat aging may not match stainless or metal options, but the transparency around size helps reduce “wrong fit” risk.

Who It’s For

I’d choose this if you like measurement-based shopping and want to compare the provided diameters against your Jeep’s mounting opening. It’s also useful if you stock parts for future repairs and want a keeper that matches the J4007456 plastic profile for your TJ.

If the hole profile is the same and the plastic is holding up to your local heat conditions, it should do the job.

Package Quantity	4PCS
Material	Tough PP material
Replace Part Numbers	91503-SS0-003, 90602S10003, 91604-SD2-013 and others listed
Compatibility Claims	Honda/Acura models listed (not Jeep TJ in provided details)

What We Found

Surosha sells a four-pack of hood prop rod clips, but the compatibility information shown is aimed at Honda and Acura applications – not Jeep TJ components. The listing references other OEM numbers and mentions vehicles like Accord, Odyssey, Prelude, and similar models.

It claims a PP (polypropylene) material and frames the clips as stabilizers to prevent accidental hood movement. The problem for TJ shoppers is that there’s no mention of J4007456 or 55075480AC in the provided details.

Even though the design sounds like a general-purpose hood support clip, I wouldn’t treat it as a direct Jeep TJ hood prop keeper replacement without matching the correct Jeep OEM part numbers and hole geometry.

Who It’s For

This set is more suited to buyers maintaining the Honda/Acura vehicles listed in its compatibility section. The four-pack is practical if you want spares to keep downtime low.

For Jeep TJ owners, I’d pass unless you can confirm the clip matches the J4007456 or 55075480AC numbers for your exact setup – otherwise, you risk an insecure fit and the hood prop not holding as intended.

What to Look For Before Buying

For a Jeep TJ hood prop clip, I start with two things: the OEM part number and the hole/seat geometry. Because these clips sit near engine heat, material choice matters for how well they handle aging over time. And since compatibility can change across close Wrangler years and related models, I’d cross-check fit details instead of trusting generic “compatible with” language. After that, I prioritize designs that keep the hood prop rod firmly seated – no wobble, no partial engagement.

Check Match the OEM Part Number and Hole Shape

Before I check out, I confirm the hood prop keeper’s OEM number. In these listings, the most common matches are J4007456 and 55075480AC. If the listing mentions a rectangular hole layout or provides measurements, I use that to verify the clip can seat correctly. Don’t shop by year alone when hole geometry can shift across revisions – compare what you see on the vehicle to what the listing describes.

Value Balance Material Durability With Price

Plastic keepers can work, but engine-bay heat can accelerate wear and deformation. Stainless steel and metal-leaning options generally hold up better where heat and aging are concerns. If you see a two-pack, it can be a smart way to refresh both sides at once – just remember that long-term reliability still depends on getting the fit right and using a material suited to the location.

Rating Use Fit-Confidence Signals When Ratings Are Missing

When there’s no rating data, I rely more on fit confidence signals: OE-spec claims, vehicle-fit tools, and part-number targeting. Broad “compatible with” language isn’t enough by itself. If dimensions or explicit installation clarity are available, I treat that as a good sign – anything that helps you confirm the clip will sit and retain correctly.

Verify Confirm Installation Method and Secure Retention

I check whether the clip is press-in, uses a bolt, or involves a screw-fixing step. Different retention styles can require different hardware steps and may change how the prop rod locks in place. After installation, the prop rod should fully seat and hold without wobble. If the listing suggests a bolt-tightening or screw step, I’d follow it closely to get proper retention.

Frequently Asked Questions

Which part number matches most Jeep TJ hood prop clip replacements?

A lot of these listings point to J4007456 for hood prop rod retainer keepers, while some Wrangler applications use 55075480AC instead. The correct part depends on the exact hood prop mechanism on your vehicle. If you’re unsure, confirm what the existing clip is and match the OEM number listed for your TJ setup.

Are stainless steel hood prop clips worth it for Jeep TJ owners?

Stainless options are typically chosen to reduce problems from heat aging and brittleness compared with plastic keepers. Some also change the retention approach (like screw fixing) to improve how firmly the prop holds. They can cost more, but if you open the hood often or want the longest-lasting repair, they’re usually the better direction – just make sure the part number and hole style match.

Do hood prop rod clips require special tools to install?

Most replacements are designed for straightforward installation, but the retention method matters. Some clips are press-in, while upgraded designs may require bolt or screw tightening. Basic hand tools may be needed depending on the version you buy. If the listing doesn’t include instructions, follow the installation steps shown in the listing images or the method described on the product page.

Why does fit vary between close model years of Wrangler and related cars?

Even when years are close, the hood prop clip and mounting hole geometry can change by revision, trim, or other build differences. Some listings also only cover a specific year window, and dimensions aren’t always provided. That’s why matching the OEM part number (and any listed dimensions or hole shape details) is the best way to avoid an incorrect clip.

What signs indicate the hood prop clip needs replacement?

If the hood prop feels like it slips, wobbles, or doesn’t stay properly seated when the hood is open, that’s a clear sign the keeper isn’t holding correctly. Damage like cracks, deformation, missing pieces, or looseness around the mounting hole can also point to failure. Replacing the clip restores stable support during maintenance.

🎯 Final Verdict

If I’m aiming for the most durable replacement behavior, I’d pick the EVRBUL stainless upgraded screw-fixing hood prop rod retainer clip. It targets J4007456 and is specifically positioned to resist aging while improving retention through screw fixing. For a more OE-style repair approach – especially when you can confirm fit through a vehicle-fit tool – I’d also consider Dorman 45999. In any case, start with the correct OEM part number (J4007456 vs. 55075480AC) and make sure the clip’s hole/seat style matches your TJ before installing.